Cisco AIR-PCM340 Installation And Configuration Manual page 107

Chapter 6 Advanced Configuration on Mac OS X
Table 6-4
Parameter
Enable WEP
Enable LEAP
Table 6-5 describes the buttons on the advanced connection properties screen.
Table 6-5
Button
Network Name Right
Arrow or Down Arrow
Turn Radio On
Turn Radio Off
Set WEP Key
Set LEAP
Username/Password
Cancel
Apply
Help
OL-1377-01
Advanced Connection Properties Screen Parameters (continued)
Description
Enables or disables Wired Equivalent Privacy (WEP) for your client adapter.
If you want to enable WEP for your client adapter, you must select this
•
check box and create a WEP key. Refer to
for more information on WEP and instructions on setting a WEP key.
This check box can also be used to disable WEP. If you enable
Note
LEAP for your client adapter, this check box is selected
automatically.
Default: Deselected
Enables or disables LEAP (also referred to as EAP - Cisco Wireless) for your
client adapter.
If you want to enable LEAP for your client adapter, you must select this check
box and set a LEAP username and password. Refer to
Features," for more information about LEAP and instructions on setting a
LEAP username and password.
Default: Deselected
Buttons on the Advanced Connection Properties Screen
Description
Allows you to specify one or up to three network names. The right arrow
indicates one network name can be entered. When you click the right arrow,
it changes to a down arrow to indicate three network names can be entered
and Network Name changes to Network Names.
Turns the client adapter radio on or off. The button changes to indicate the
operation to be performed; for example: Turn Radio On indicates the radio
is turned on when you click the button and Turn Radio Off indicates the
radio is turned off when you click the button.
Allows you to set up to four WEP keys (for additional information refer to
Chapter 4, "Security Features").
Allows you to set your LEAP username and password (for additional
information refer to
Exits the application or screen without saving revised settings.
Exits the application or screen and saves the revised settings.
Allows you to access the client utility help screen (for additional
information see "Getting Help" section on page 6-22.
Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for Mac OS
Using the Client Utility on Mac OS X
Chapter
Chapter 4, "Security Features").
4, "Security Features"
Chapter 4, "Security
6-13