Front Overview; Unpacking The Autoloader; Rear Overview; Choosing A Location - HP StorageWorks 1/8 Ultrium 960 Manual

Front overview

1. Mailslot
2. Front panel LED's
3. Power switch
4. Front panel LCD display
5. Control keys

Rear overview

1. 68-pin SCSI connector
2. Fan vent
3. Power connector

Internal overview

1. Drive
2. Cartridge carriers
1

Unpacking the autoloader

After removing the accessories package, lift the
autoloader and padding out of the box and place it on
a work surface, top facing up. Carefully remove the
shipping padding from the left and right sides of the
autoloader and then the bag. Save the packing
materials to move or ship the autoloader in the future.
2

Choosing a location

Select a location that has adequate clearance for
ventilation, minimal dust and debris, and has an
appropriate power source.
For standalone autoloaders, select a location that is flat,
sturdy, and level. Do not place the autoloader on its
side or stack items on top of the autoloader.