Table of Contents
Advertisement
Removing the cover
Complete the following steps to remove the server cover.
Note:
1. Turn off the server and peripheral devices.
2. Disconnect the power cord; then, disconnect all external cables from the server.
3. Loosen the two captive screws on the rear of the server.
4. Slide the cover back, then up and off the server.
34
xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide
v Read "Safety information" on page 87.
v Read "Handling static-sensitive devices" on page 29.
Attention:
For proper cooling and airflow, replace the cover before turning on
the server. Operating the server for extended periods of time (over 30 minutes)
with the cover removed might damage server components.
Captive screws
Advertisement
Table of Contents
