Table of Contents
Advertisement
6. Reinstall the server cover, see "Installing the cover" on page 42.
7.
8. Start the Configuration/Setup Utility program and set configuration parameters.
Input/output ports and connectors
Your server has the following I/O connectors on the front and rear of the server:
v Serial connector
v Universal Serial Bus (USB) connectors
v Keyboard connector
v Video connector
v Auxiliary-device (pointing device) connector
v Ethernet connectors
Serial port
Your server has one standard serial port. Some application programs require
specific ports, and some modems function properly only at certain serial port
addresses. Use the Configuration/Setup Utility program to change the port address
assignments and prevent conflicts.
Viewing or changing the serial-port assignments
Complete the following steps to view or change the serial-port assignments:
1. Restart the server and watch the monitor screen.
2. When the message Press F1 for Configuration/Setup appears, press F1.
3. From the main menu, select Devices and I/O Ports; then, press Enter.
Reconnect the external cables and power cords; then, turn on the peripheral
devices and the server.
v Set the system date and time and the power-on password.
v Reconfigure your server.
Keyboard
Video
Mouse
Ethernet 1
Chapter 4. Customer replaceable units
USB 2
USB 1
Serial
Ethernet 2
45
Advertisement
Table of Contents
