IBM 867372X Maintenance And Troubleshooting Manual page 80

User manual

Table of Contents

Note: See "Server" on page 80 to determine which components should be replaced by a field service technician.

Error code/symptom

101, 102, 106 (System and processor

error)

114 (Adapter read-only memory error)

151 (Real time clock error)

161 (Real time clock battery error)

162 (Device configuration error)

Note: Be sure to load the default settings

and any additional desired settings; then,

save the configuration.

163 (Real-time clock error)

164 (Memory configuration changed.)

175 (Hardware error)

176 (Computer cover or cable cover was

removed without a key being used)

177, 178 (Security hardware error)

184 (Power-on password corrupted)

185 (Drive startup sequence information

corrupted)

186 (Security hardware control logic failed) 1. Run the Configuration/Setup Utility program.

187 (VPD serial number not set.)

188 (Bad EEPROM CRC #2)

189 (Three attempts made to enter the

system with invalid passwords)

201 (Memory test error.) If the server does

not have the latest level of BIOS installed,

update the BIOS to the latest level and

run the diagnostic program again.

xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide

FRU/action

v System board

1. Run diagnostics.

2. Failing adapter.

1. Run diagnostics.

2. Battery.

3. System board.