Inactivity Standby - Dish Network SoloDVR ViP 612 User Manual

Chapter 11

Inactivity Standby

I
NACTIVITY
If your receiver is on for a preset period of time without any activity (for example, no
channel changes), the Inactivity Standby feature turns off the receiver so that you'll always
have the latest Program Guide and DISH On Demand programs. Enabling this feature is
recommended, as it also helps improve the reliability of your receiver. To change the
settings for this feature, use the following steps:
1
Press MENU on the remote control.
2
Select Preferences, and then Inactivity Standby.
3
Highlight Activation and use the UP and DOWN ARROW buttons to switch between
Enabled and Disabled.
4
Highlight Inactivity Duration and use the UP and DOWN ARROW buttons to select the
amount of time the receiver waits before turning off.
5
Select Done.
Note: Select Defaults to reset the changes you've made to this feature.
T
IPS
• To take full advantage of Dolby Digital 5.1 surround sound, you need an optical cable
and a stereo that supports this feature.
• To use the Caller ID feature on this receiver, be sure to have the receiver connected
to an active phone line and subscribe to Caller ID service from your phone company.
Q
UESTIONS
• How can I see who has called me in the past? Open your Caller ID History by
pressing MENU, select System Setup and then Caller ID History.
• Why is my audio in another language? You may have selected an alternate lan-
guage. See the instructions on page 80 to change your preferred language.
• How can I change the channel order in the Program Guide? You can switch from
ascending order (lowest to highest) or descending order (highest to lowest) by follow-
ing the instructions on page 83.
84
S
TANDBY