Inactivity Standby - Dish Network ViP222 User Manual

I S
NACTIVITY TANDBY
If your receiver is on for a preset period of time without any activity (for example, no
channel changes), then the Inactivity Standby feature turns off the receiver (the front panel
light goes out) so that you'll always have the latest Program Guide information. Enabling
this feature, which is highly recommended, also improves the reliability of your receiver. To
change the settings for this feature, complete the following:
Note: Select Defaults to reset the changes you've made to this feature.
1
Press the MENU button.
2
Select Preferences, and then Inactivity Standby.
3
Highlight Activation and use the UP and DOWN ARROW buttons to switch between
Enabled and Disabled.
4
Highlight Inactivity Duration and use the UP and DOWN ARROW buttons to select the
amount of time the receiver waits before turning off.
5
Select Done.
Note: Select Defaults to reset any changes yo have made to this feature.
T
IPS
• To take full advantage of Dolby Digital 5.1 surround sound, you need an optical digital-
audio cable and an audio-video system that supports this feature.
• Be sure to have the receiver connected to an active telephone line and obtain Caller
ID service from your phone company to use the Caller ID feature on this receiver.
Receiver Customization

Inactivity Standby

83