Dish Network SoloDVR ViP 612 User Manual page 94

Standard-Definition Connections
1
Connect the receiver to the TV using one of the following:
• A /V connection (RCA-type composite connection)
UDIO IDEO
• S-V and L
IDEO EFT
• TV S O
ET UT
2
If using the TV S O
ET UT
close to where it connects to the TV S
sticker is in the front cover of this guide.
3
Turn on the TV and receiver to make sure you have a picture.
• If using the TV S
ET
This output channel can be changed in the receiver's menus by pressing MENU on
the remote control, selecting System Setup, Installation, then Modulator Setup.
The default output is channel 3.
• If using the S-V
IDEO
input or source. Refer to your TV's user guide for more information.
4
Turn up the volume on the TV to make sure you have audio.
/R A
IGHT UDIO
connection, peel off the white sticker and attach it to the cable
O connection on the back of the receiver. The
ET UT
O connection, you'll need to set your TV to either channel 3 or 4.
UT
or A /V connections, you'll need to set your TV to a video
UDIO IDEO
Connections
Connecting to the TV
89