Dish Network SoloDVR ViP 612 User Manual page 75

Chapter 10
Operating Other Devices
2
Press the POUND (#) button twice.
Watch the mode light to determine
your code. The mode button flashes
the number for each digit of the device
code, with a pause between the
groups of flashes. A quick flash is for
zero.
For AUX mode: The first group of
flashes tells you what the AUX mode
controls. A quick flash (zero) before
the three-digit code is for a TV; one
regular flash is for a VCR; and two
flashes is for a tuner, or amplifier.
For a satellite receiver programmed
in AUX mode: The AUX mode button
will flash the same number of times as
the address number.
For Limited Mode: If you have
programmed a TV or VCR in Limited
Mode, the mode button flashes once
at the end of the flash sequence.
70
Instructions Additional Information
For example, if the code is 570, the mode
button flashes five times, pauses, flashes
seven times, pauses, and flashes once
quickly.
For example, if the TV code is 570, the AUX
mode button flashes once quickly (indicating 0
for TV), pauses, flashes five times, pauses,
flashes seven times, pauses, and flashes once
quickly.
For example, if the receiver address is 3, the
AUX mode button flashes three times.
For example, if the TV code is 570, the AUX
mode button flashes once quickly (indicating 0
for TV), pauses, flashes five times, pauses,
flashes seven times, pauses, flashes once
quickly, and then flashes once (indicting
Limited Mode).