This section describes how to start using this machine.
Guide to Components
This section introduces the names and functions of the components.
1.
Auto Document Feeder (ADF)
(The illustration shows the ADF.)
If you load a stack of originals in the auto-
document feeder (ADF), the ADF will au-
tomatically feed the originals one by one.
2.
Exposure glass
Place originals face down here for copy-
ing.
3.
Main power switch
If the machine does not operate after
turning on the operation switch, check
the main power switch is turned on.
See "Turning On the Power".
4.
Operation switch
Press to turn the power on (the On indi-
cator lights up). To turn the power off,
press again (the On indicator goes off).
See "Turning On the Power".
1. Getting Started
5.
Control panel
See "1.2 Control Panel".
6.
Internal Tray 1
Copied, printed paper or fax messages
are delivered here.
7.
Front Cover
Open this cover when a paper jam occurs.
8.
Paper Tray 1,2
Load paper here.
9.
Lower Paper Trays (optional)
Load paper here.
AMG010S
11