When You Have Problems Operating The Machine - Ricoh Aficio MP C2030 Operating Instructions Manual

1. When the Machine Does Not Operate As Wanted
When You Have Problems Operating the
Machine
1
This section describes common problems and messages.
If other messages appear, follow the instructions displayed.
Problem
Although the copier screen
appears when the machine is
turned on using the main
power switch, it cannot be
switched to another screen by
pressing the [Printer] or
[Scanner] key.
The machine has just been
turned on and the User Tools
screen is displayed, but the
User Tools menu has items
missing.
The operation switch
indicator continues blinking
and does not turn off when
pressed.
The display is difficult to see.
The display is off.
14
Cause
Functions other than the
copier function are not yet
ready.
Functions other than the
copier function are not yet
ready. Time required varies
by function. Functions appear
in the User Tools menu when
they become ready for use.
This occurs in the following
cases:
• The exposure glass
cover or ADF is open.
• The machine is
communicating with
external equipment.
• The machine is cooling
down.
Screen contrast is not
adjusted.
The machine is in Energy
Saver mode.
Solution
Wait a little longer.
Wait a little longer.
• Close the exposure glass cover or
ADF.
• Check if the machine is
communicating with external
equipment.
• Wait a little longer.
Adjust the screen contrast so that you
can see the display panel properly. For
details about Screen Contrast, see
"System Settings", Network and System
Settings Guide .
Turn on the operation switch.