Packet Statistics - TP-Link JetStream TL-SG3216 User Manual

Bound IP-Range (ID):
Max Groups:
LAG:
Note:
1. Multicast Filter feature can only have effect on the VLAN with IGMP Snooping enabled.
2. Multicast Filter feature has no effect on static multicast IP.
3. Up to 5 IP-Ranges can be bound to one port.
Configuration Procedure:
Step Operation
1 Configure IP-Range
2 Configure multicast filter
rules for ports

8.4 Packet Statistics

On this page you can view the multicast data traffic on each port of the switch, which facilitates you
to monitor the IGMP messages in the network.
Choose the menu Multicast→Packet Statistics to load the following page.
Enter the IP-rang ID the port will be bound to.
Specify the maximum number of multicast groups to prevent some
ports taking up too much bandwidth.
Displays the LAG number which the port belongs to.
Description
Required. Configure
Multicast→Multicast Filter→IP-Range page.
Optional. Configure multicast filter rules for ports on
Multicast→Multicast Filter→Port Filter page.
Figure 8-12 Packet Statistics
105
IP-Range to be filtered on