TP-Link JetStream TL-SG3216 User Manual page 21

The following entries are displayed on this screen:
Time Info
Current System
Date:
Current Time Mode:
Time Config
Manual:
Get GMT:
Synchronize
PC'S Clock:
DST Config
DST Status:
Start Time:
End Time:
Figure 4-5 System Time
Displays the current date and time of the switch.
Displays the current time mode of the switch.
When this option is selected, you can set the date and time
manually.
When this option is selected, you can configure the time zone and
the IP Address for the NTP Server. The switch will get GMT
automatically if it has connected to a NTP Server.
Time Zone: Select your local time.
Primary/Secondary NTP Server: Enter the IP Address for the
NTP Server.
with When this option is selected, the administrator PC's clock is
utilized.
Enable or Disable DST.
Select the Start Time of DST.
Select the End Time of DST.
14