Port Config - TP-Link JetStream TL-SG3216 User Manual

Retry Times:
Supplicant Timeout:
Server Timeout:

11.4.2 Port Config

On this page, you can configure the 802.1X features for the ports based on the actual network.
Choose the menu Network Security→802.1X→Port Config to load the following page.
The following entries are displayed on this screen:
Port Config
Port Select:
Select:
Port:
failed to the 802.1X Authentication, then the switch will not
respond to the authentication request from the same
supplicant during the Quiet Period.
Specify the maximum transfer times of the repeated
authentication request.
Specify the maximum time for the switch to wait for the
response from supplicant before resending a request to
the supplicant.
Specify the maximum time for the switch to wait for the
response from authentication server before resending a
request to the authentication server.
Figure 11-21 Port Config
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select your desired port for configuration. It is multi-optional.
Displays the port number.
161