TP-Link JetStream TL-SG3216 User Manual page 195

Choose the menu Cluster→NTDP→NTDP Config to load the following page.
The following entries are displayed on this screen:
Global Config
NTDP:
NTDP Interval Time:
NTDP Hops:
NTDP Hop Delay:
NTDP Port Delay:
Port Config
Select:
Port:
NTDP:
Figure 13-8 NTDP Config
Select Enable/Disable NTDP for the switch globally.
Enter the interval to collect topology information. The default is 1
minute.
Enter the hop count the switch topology collects. The default is 3
hops.
Enter the time between the switch receiving NTDP request
packets and the switch forwarding NTDP request packets for the
first time. The default is 200 milliseconds.
Enter the time between the port forwarding NTDP request packets
and its adjacent port forwarding NTDP request packets over. The
default is 20 milliseconds.
Select the desired port for NTDP status configuration.
Displays the port number of the switch.
Displays NTDP status (enabled or disabled) of the current port.
188