History Control; Event Config - TP-Link JetStream TL-SG3216 User Manual

The RMON Groups can be configured on the History Control, Event Config and Alarm Config
pages.

12.3.1 History Control

On this page, you can configure the History Group for RMON.
Choose the menu SNMP→RMON→History Control to load the following page.
The following entries are displayed on this screen:
History Control Table
Select:
Index:
Port:
Interval:
Owner:
Status:

12.3.2 Event Config

On this page, you can configure the RMON events.
Choose the menu SNMP→RMON→Event Config to load the following page.
Figure 12-9 History Control
Select the desired entry for configuration.
Displays the index number of the entry.
Specify the port from which the history samples were taken.
Specify the interval to take samplings from the port.
Enter the name of the device or user that defined the entry.
Select Enable/Disable the corresponding sampling entry.
176