Bandwidth Control; Rate Limit - TP-Link JetStream TL-SG3216 User Manual

9.2 Bandwidth Control

Bandwidth function, allowing you to control the traffic rate and broadcast flow on each port to
ensure network in working order, can be implemented on Rate Limit and Storm Control pages.

9.2.1 Rate Limit

Rate limit functions to control the ingress/egress traffic rate on each port via configuring the
available bandwidth of each port. In this way, the network bandwidth can be reasonably distributed
and utilized.
Choose the menu QoS→Bandwitdth Control→Rate Limit to load the following page.
The following entries are displayed on this screen:
Rate Limit Config
Port Select:
Select:
Port:
Ingress Rate (bps):
Egress Rate(bps):
LAG:
Figure 9-10 Rate Limit
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for Rate configuration. It is multi-optional.
Displays the port number of the Switch.
Select the bandwidth for receiving packets on the port.
Select the bandwidth for sending packets on the port.
Displays the LAG number which the port belongs to.
114