TP-Link JetStream TL-SG3216 User Manual page 75

Note:
If the GVRP feature is enabled for a member port of LAG, please ensure all the member ports of
this LAG are set to be in the same status and registration mode.
The following entries are displayed on this screen:
Global Config
GVRP:
Port Config
Port Select:
Select:
Port:
Status:
Registration
Mode:
Figure 6-11 GVRP Config
Allows you to Enable/Disable the GVRP function.
Click the Select button to quick-select the corresponding entry based
on the port number you entered.
Select the desired port for configuration. It is multi-optional.
Displays the port number.
Enable/Disable the GVRP feature for the port. The port type should be
set to TRUNK before enabling the GVRP feature.
Select the Registration Mode for the port.
•
Normal: In this mode, a port can dynamically register/deregister
a VLAN and propagate the dynamic/static VLAN information.
68