Storm Control - TP-Link JetStream TL-SG3216 User Manual

Note:
1. If you enable ingress rate limit feature for the storm control-enabled port, storm control feature
will be disabled for this port.
2. When egress rate limit feature is enabled for one or more ports, you are suggested to disable
the flow control on each port to ensure the switch works normally.

9.2.2 Storm Control

Storm Control function allows the switch to filter broadcast, multicast and UL frame in the network.
If the transmission rate of the three kind packets exceeds the set bandwidth, the packets will be
automatically discarded to avoid network broadcast storm.
Choose the menu QoS→Bandwitdth Control→Storm Control to load the following page.
The following entries are displayed on this screen:
Storm Control Config
Port Select:
Select:
Port:
Figure 9-11 Storm Control
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select the desired port for Storm Control configuration. It is
multi-optional.
Displays the port number of the Switch.
115