Lag - TP-Link JetStream TL-SG3216 User Manual

Select:
Port:
Max Learned MAC:
Learned Num:
Learn Mode:
Status:
Note:
1. The Port Security function is disabled for the LAG port member. Only the port is removed from
the LAG, will the Port Security function be available for the port.
2. The Port Security function is disabled when the 802.1X function is enabled.

5.2 LAG

LAG (Link Aggregation Group) is to combine a number of ports together to make a single
high-bandwidth data path, so as to implement the traffic load sharing among the member ports in
the group and to enhance the connection reliability.
For the member ports in an aggregation group, their basic configuration must be the same. The
basic configuration includes STP, QoS, GVRP, VLAN, port attributes, MAC Address Learning
mode and other associated settings. The further explains are following:
If the ports, which are enabled for the GVRP, 802.1Q VLAN, Voice VLAN, STP, QoS, DHCP
Snooping and Port Configuration (Speed and Duplex, Flow Control), are in a LAG, their
configurations should be the same.
The ports, which are enabled for the Port Security, Port Mirror, MAC Address Filtering,
Static MAC Address Binding and 802.1X Authentication, can not be added to the LAG.
It's not suggested to add the ports with ARP Inspection and DoS Defend enabled to the
LAG.
If the LAG is needed, you are suggested to configure the LAG function here before configuring the
other functions for the member ports.
Select the desired port for Port Security configuration. It is
multi-optional.
Displays the port number.
Specify the maximum number of MAC addresses that can be
learned on the port.
Displays the number of MAC addresses that have been learned
on the port.
Select the Learn Mode for the port.
•
Dynamic: When Dynamic mode is selected, the learned
MAC address will be deleted automatically after the aging
time.
•
Static: When Static mode is selected, the learned MAC
address will be out of the influence of the aging time and
can only be deleted manually. The learned entries will be
cleared after the switch is rebooted.
•
Permanent: When Permanent mode is selected, the
learned MAC address will be out of the influence of the
aging time and can only be deleted manually. The learned
entries will be saved even the switch is rebooted.
Select Enable/Disable the Port Security feature for the port.
33