Solo; The Zone Region; Main; Layer - Kurzweil PC1 - MUSICIANS GUIDE REV B Manual

Performance Features
Front Panel
The following table is the summary of controller assignment in Program mode (Internal Setup)
Controller
Knob A
Knob B
Knob C
Knob D
SW1
SW2
SW3
SW4
MW
Mpress
Ribbon
CCPed
Setup mode
Buttons SW1-SW4 are programmable in Setup mode. They can have different functions for each
zone in every setup. In other words, you can change what one of these buttons does in Zone 1 of
a setup, for example, and it won't change what that button does in the other zones of that setup
(or in any other setup).
EQ
The PC1 has its own three-band global equalization (EQ). See EQ on page 3-12 for details.

Solo

In either Program mode or Setup mode, pressing this button turns on the solo feature (if you're
in Program mode, the PC1 switches to AutoSplit mode—a special performance configuration of
Setup mode.). When the Solo feature is on, (that is, when its LED is lit), pressing one of the Zone
buttons solos that zone, so you hear that zone only. See page 3-18 for more about muting and
soloing program.

The Zone Region

Main

In Program mode, this button takes you to AutoSplit mode—a special performance and editing
configuration of Setup mode. In this case, the Zone 2–Zone 4 buttons add splits or layers, as
indicated (See page 3-15 for more information about layering and splitting). In Setup mode, this
button selects Zone 1 for viewing or editing. Press it again to mute/unmute the zone.

Layer

In Program mode, this button switches the PC1 into AutoSplit mode, and adds a layer.
In Setup mode, this button selects Zone 2 for viewing or editing.
3-6
Assignment
FX-A Depth
FX-B Depth
Assignable (Timbre)
Assignable (Timbre)
Octave Shift
Assignable (Timbre)
Arp On/Off
Assignable (Timbre)
Assignable (Vibrato)
Aftertouch
Pitchbend
Expression
MIDI Control Num
MIDI 91
MIDI 93
MIDI 06
MIDI 13
No MIDI Message
MIDI 09
No MIDI Message
MIDI 29
MIDI 01
MIDI 33
MIDI 21/53
MIDI 11