Basic Connections; Power - Kurzweil PC1 - MUSICIANS GUIDE REV B Manual

Midi performance controller

Table of Contents

Startup

Basic Connections

The PC1 has an external transformer/power supply with a standard electrical plug on one end, and a

coaxial plug that connects with the PC1. This is a specialized power supply, and is not

interchangeable with other power supplies.

Caution: Use only the power supply that comes with your PC1, or a replacement purchased from an

authorized Kurzweil dealer. Using a different power supply can seriously damage your PC1!

Before connecting the power supply, make sure your PC1 is off

Place the power supply somewhere where it will stay dry and out of the way. We recommend

keeping it on the floor. Never cover the power supply with anything; it needs adequate ventilation

to prevent overheating.

Connect the plug at the other end of the power-supply cable into a standard power outlet. If you

plan to take your PC1 to a location that uses a different voltage level, you'll need to get an additional

power supply that's compatible with the local voltage.

2-2

Figure 2-2 Installing the music rack

Table of Contents