2. Windows KX Driver
2-2-1 Custom Paper Size dialog box
I Setting a custom paper size
Perform the following procedure in order to register a custom size when you want to print onto a non-standard size of paper. The informa-
tion registered here will be displayed under the "Page Size" setting in the Media Tab as well as in the Paper Size setting of your application.
If you want to register a new custom paper size, click on the "Add" button. The "Edit Paper Size" dialog box will appear.
If you want to change a previously registered paper size, click on the registered size
1
to select it and then click on the "Edit" button.
If you want to delete a registered paper size, click on the desired size to select it and
then click on the "Remove" button.
Type into the "Name" field the name you want to use for this custom size of paper.
* It is the name that you register here that will actually be displayed under the "Page
Size" setting.
2
Select the desired unit of measurement in the "Units" block and the desired
dimensions of the paper in the "Size" block.
3
<Available settings>
Units: "Inches" or "Millimeters"
Height:
5.83 - 17.00 [Inches]
148.1 - 431.8 [Millimeters]
Width:
3.88 - 11.69 [Inches]
98.5 - 297.0 [Millimeters]
Click on the "OK" button. The "Custom Paper Sizes" dialog box will appear once again.
4
Click on the "OK" button.
5
2-3