Kyocera KM-1530 Instruction Handbook Manual page 94

1. Procedure for Installing and Printing with a Printer Driver
1-6 Printing
The following is an example procedure for printing using a printer driver under the conditions and environment noted below.
• OS : Windows 98
• Printer driver : KX Driver
• Application : Wordpad
• Printing conditions : Print and staple
If you use a system or driver other than that noted above, use the following procedure simply as a reference tool. It is additionally recom-
mended that you read the section corresponding to your operation system as it will contain further explanations specifically regard that OS
and other related drivers.
G Making the printer driver settings in Windows
1
Click on [Start] on the Task Bar.
The Start menu will appear.
Use the mouse to point to [Settings] and click on [Printers] in the corresponding
2
submenu.
The [Printers] folder will open.
Use the right mouse button to click on the icon for this printer. A pop-up menu will be
3
displayed.
Select [Properties] from that menu.
The Properties window will appear.
Click on the [Device settings] Tab.
4
Perform the following settings in order to staple your printed sets.
5
"Device Options" setting
1 Select "Internal Finisher" as the "Device Options" setting.
2 Set the "Memory" setting to more than 24 MB.
(It is necessary to increase the memory capacity of your printer.)
3 Select "RAM Disk".
Once you have completed these settings, click on [OK].
1-8