Kyocera KM-1530 Instruction Handbook Manual page 13

2. Set-up
11
The numeric keys will be used to enter the IP address:
First, enter the first 3 digits of the IP address.
* The numbers you enter will be input into the currently
highlighted area of the display.
12
Press the > cursor key and then enter the next 3 digits of
the IP address into the next highlighted block.
13
Continue the same procedure for the other 2 blocks and,
once the IP address has been entered, press the Enter key.
14
Use the M and N cursor keys to select "Subnet Mask" and
then press the Enter key.
15 Repeat steps 11 - 13 in order to enter the Subnet Mask
using the same procedure that you did for entering the IP
address.
8
16
Use the M and N cursor keys to select "Gateway" and then
press the Enter key.
17
Repeat steps 11 - 13 in order to enter the Gateway address
using the same procedure that you did for entering the IP
address.
Once you are finished making all of the network settings,
18
press the Printer key. The machine will switch back to the
copier mode.