Kyocera KM-1530 Instruction Handbook Manual page 12

<20 ppm copier>
* To cancel the setting midway through it, press the Stop/Clear key.
1
Press the Printer key. The machine will switch to the printer
mode.
2
Use the M and N cursor keys to select "MENU" and then
press the Enter key.
3
Use the M and N cursor keys to select "Interface" and then
press the Enter key.
4
Use the M and N cursor keys to select "Option" and then
press the Enter key.
5 Use the M and N cursor keys to select "TCP/IP" and then
press the Enter key.
6 Use the M and N cursor keys to select "On" and then press
the Enter key.
7 Use the M and N cursor keys to select "Change #" and
then press the Enter key.
8
Use the M and N cursor keys to select "DHCP" and then
press the Enter key.
9
Use the M and N cursor keys to select "Off" and then press
the Enter key.
10
Use the M and N cursor keys to select "IP Address" and
then press the Enter key.
2. Set-up
7