Kyocera KM-1530 Instruction Handbook Manual page 69

2. Printer Settings (20 ppm copier)
2. Printer Settings (20 ppm copier)
2-1 Procedure for making settings
Press the Printer key. The machine will switch to the printer mode.
1
Use the " " and " " cursor keys to select "MENU" and then press the Enter key.
2
Select the desired setting.
3
(Refer to "2-2 Menu flow chart" on page 2-3 for a list of the various possible settings.)
Note
Settings are categorized into a hierarchy under the "MENU" command. Use the " "
and " " cursor keys to select "MENU" and then press the Enter key to access the
menu of available setting items. Once the desired setting is selected, press the Enter
key once again.
Change the desired setting.
4
(Refer to "2-3 List of settings" on page 2-7 for information regarding each item and its
possible settings.)
Note
Settings are normally changed (turned ON and OFF, etc.) by using the " " and " "
cursor keys to move the selection cursor (e) and select the desired setting, and then
pressing the Enter key.
When it is necessary to type in a value or number directly (such as with a network
address or the time, etc.), use the numeric keys to enter the desired information and
the cursor left and right keys to change the location of the cursor. Once entry is
complete, press the Enter key.
Press the Printer key again to switch back to the copier mode.
5
2-1