Installing The Switch; Installing And Connecting A J-Ex4500 Switch; Mounting A J-Ex4500 Switch - Dell PowerConnect J-EX4500 Hardware Manual

CHAPTER 9

Installing the Switch

Installing and Connecting a J-EX4500 Switch

Installing and Connecting a J-EX4500 Switch on page 75
Unpacking a J-EX4500 Switch on page 76
Mounting a J-EX4500 Switch on page 78
Mounting a J-EX4500 Switch on Two Posts in a Rack or Cabinet on page 78
Mounting a J-EX4500 Switch on Four Posts in a Rack or Cabinet on page 81
Mounting a J-EX4500 Switch in a Recessed Position in a Rack or Cabinet on page 85
To install and connect a J-EX4500 switch:
Follow instructions in "Unpacking a J-EX4500 Switch" on page 76.
1.
Mount the switch by following instructions appropriate for your site:
2.
"Mounting a J-EX4500 Switch on Two Posts in a Rack or Cabinet" on page 78 (using
the mounting brackets provided)
"Mounting a J-EX4500 Switch on Four Posts in a Rack or Cabinet" on page 81 (using
the separately orderable four-post rack-mount kit)
Follow instructions in "Connecting Earth Ground to a J-EX Series Switch" on page 99.
3.
Follow instructions for connecting power as appropriate for your site:
4.
Connecting AC Power to a J-EX4500 Switch on page 101
Perform initial configuration of the switch by following instructions in "Connecting
5.
and Configuring a J-EX Series Switch (CLI Procedure)" on page 117 or "Connecting and
Configuring a J-EX Series Switch (J-Web Procedure)" on page 118.
Set the switch's management options by following the appropriate instructions:
6.
Connecting a J-EX Series Switch to a Network for Out-of-Band Management on
page 103
Connecting a J-EX Series Switch to a Management Console on page 104
75