Unpacking A J-Ex4500 Switch - Dell PowerConnect J-EX4500 Hardware Manual

Dell PowerConnect J-Series J-EX4500 Ethernet Switch Hardware Guide
Related
Documentation

Unpacking a J-EX4500 Switch

Table 28: Inventory of Components Provided with a J-EX4500 Switch
Component
Switch
Virtual Chassis module (preinstalled)
Fan tray (preinstalled)
Power supply (preinstalled )
Power supply jumper cable
Power cord retainer clip
Cover panels for slots without installed components
Dust covers for ports
76
Rack Requirements for J-EX4500 Switches on page 57
Cabinet Requirements for J-EX4500 Switches on page 58
Clearance Requirements for Airflow and Hardware Maintenance for J-EX4500 Switches
on page 60
The J-EX4500 switches are shipped in a cardboard carton, secured with foam packing
material. The carton has an accessory compartment and contains the quick start
instructions.
CAUTION: J-EX4500 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.
To unpack the switch:
Open the carton.
1.
Pull out the packing material holding the switch in place.
2.
Verify the parts received against the inventory on the label attached to the carton and
3.
listed in Table 28 on page 76.
Save the shipping carton and packing materials in case you need to move or ship the
4.
switch later.
Quantity
1
1
1
1 AC
1
1
Power supply cover
panel: 1
Uplink module cover
panels: 2
40