Front Panel Of A J-Ex4500 Switch - Dell PowerConnect J-EX4500 Hardware Manual

Dell PowerConnect J-Series J-EX4500 Ethernet Switch Hardware Guide
Table 3: Physical Specifications of the J-EX4500 Switch Chassis
Description
Chassis height
Chassis width
Chassis depth
Weight
Related
Documentation

Front Panel of a J-EX4500 Switch

8
Value
3.5 in. (8.9 cm)
17.25 in. (43.82 cm)
The outer edges of the front-mounting brackets extend the width to 19 in. (48.3 cm).
21.1 in. (53.6 cm)
J-EX4500 switch with 1 AC power supply: 37 lb (17 kg)
AC power supply: 3 lb (1.3 kg)
You can mount the switch on a standard 19-in. two-post rack. You can also mount the
switch on a standard 19-in. four-post rack or in a standard 19-in. enclosed cabinet.
Rack Requirements for J-EX4500 Switches on page 57
Cabinet Requirements for J-EX4500 Switches on page 58
Mounting a J-EX4500 Switch on page 78
Installing and Connecting a J-EX4500 Switch on page 75
Installing and Removing J-EX4500 Switch Hardware Components on page 87
The front panel of a J-EX4500 switch consists of the following components:
40 SFP+ network ports
Network port LEDs
Two slots for installing uplink modules—Installing the uplink modules is optional.
LCD panel and the LCD navigation buttons
Chassis status LEDs
Console port
Management port
Management port LEDs
USB port
ESD point
Figure 3 on page 9 shows the front panel of a J-EX4500 switch.