Table of Contents
Advertisement
CHAPTER 7
Planning Power Requirements
AC Power Specifications for J-EX4500 Switches
Table 26: Power Specifications for an AC Power Supply Used in J-EX4500 Switches
Item
AC input voltage
AC input line frequency
AC input current rating
AC output power
Related
Documentation
AC Power Cord Specifications for a J-EX4500 Switch
AC Power Specifications for J-EX4500 Switches on page 65
AC Power Cord Specifications for a J-EX4500 Switch on page 65
Table 26 on page 65 lists the AC power specifications for a 1000 W power supply used
in J-EX4500 switches.
AC Power Supply in J-EX4500 Switches on page 21
AC Power Supply LEDs in J-EX4500 Switches on page 23
AC Power Cord Specifications for a J-EX4500 Switch on page 65
NOTE:
A jumper cable for each power supply was shipped with your switch.
If your site uses a power distribution unit (PDU) to distribute power to the
rack that houses the switch, you do not have to purchase AC power cords.
Each AC power supply for the J-EX4500 switch has a single AC appliance inlet located
on the power supply that requires a dedicated AC power feed. If your site does not use
a PDU, you need an AC power cord for your geographical location for each power supply
on the switch.
Specifications
Operating range—100–240 VAC
50–60 Hz
12 A
1000 W
65
Advertisement
Table of Contents
