Dell PowerConnect J-EX4500 Hardware Manual page 82

J-series
Hide thumbs Also See for PowerConnect J-EX4500:
Table of Contents

Advertisement

Dell PowerConnect J-Series J-EX4500 Ethernet Switch Hardware Guide
Table 27: AC Power Cord Specifications for a J-EX4500 Switch
Country/Region
Argentina
Australia
Brazil
China
Europe (except Italy,
Switzerland, and United
Kingdom)
India
Israel
Italy
Japan
Korea
66
Detachable power cords are separately orderable as a field-replaceable unit (FRU) item.
Each cord is 2.5 m (approximately 8 ft) long. The coupler type is C19 as described by the
International Electrotechnical Commission (IEC) standard 60320. The plug at the male
end of the power cord fits into the power source outlet that is standard for your
geographical location. The appliance coupler at the female end of the cord inserts into
the AC appliance inlet on the faceplate of the AC power supply.
NOTE:
In North America, AC power cords must not exceed 4.5 m
(approximately 15 ft) in length, to comply with National Electrical Code (NEC)
Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code
(CEC) Section 4-010(3). The cords separately orderable as FRUs are in
compliance.
Table 27 on page 66 lists the AC power cord specifications for a J-EX4500 switch for the
countries and regions listed in the table.
Electrical Specification
250 VAC, 16 A
250 VAC, 15 A, 50 Hz
250 VAC, 16 A
250 VAC, 16 A, 50 Hz
250 VAC, 16 A, 50 Hz
250 VAC, 16 A
250 VAC, 16 A
250 VAC, 16 A, 50 Hz
250 VAC, 16 A, 50 Hz
250 VAC, 16 A, 50 Hz
Plug Standard
RA/3/20, IRAM 2073
AS/NZS 3112
BR/3/20, NBR 14136:2002
GB 1002
CEE (7) VII
ZA/3, SABS 164/1:1992
IL/3, SI 32/1971
CEI 23-16
NEMA 6–20
NEMA L6–20
CEE (7) VII

Advertisement

Table of Contents
loading

Table of Contents