Table of Contents
Advertisement
CHAPTER 6
Cable Requirements
Network Cable Specifications for J-EX4500 Switches
Related
Documentation
Network Cable Specifications for J-EX4500 Switches on page 63
J-EX4500 switches have interfaces that use various types of network cables.
For instructions on connecting the switch to a network for out-of-band management
using an Ethernet cable with an RJ-45 connector, see "Connecting a J-EX Series Switch
to a Network for Out-of-Band Management" on page 103.
For instructions on connecting the switch to a management console using an Ethernet
cable with an RJ-45 connector, see "Connecting a J-EX Series Switch to a Management
Console" on page 104.
Management Port Connector Pinout Information for a J-EX4500 Switch on page 34
Console Port Connector Pinout Information for a J-EX Series Switch on page 34
Front Panel of a J-EX4500 Switch on page 8
Virtual Chassis Ports Connector Pinout Information for J-EX4500 Switches on page 36
Cabling Requirements for a Virtual Chassis on page 70
63
Advertisement
Table of Contents
