Table of Contents
Advertisement
2
Installing a BigIron RX-32 switch
Details of cable routing are as follows:
CAUTION
Be sure not to exceed the minimum recommended bend radius for the cables: 2 in. for MRJ-21
cables, and 1.5 in. for Category 5 (RJ-45) and fiber-optic cables.
Cable routing for the upper-left quadrant
Route slot cards in the numerical order starting with the cables of Slot Card #1.
1. Route slot cards #1 and #2 cables directly to the left through the side comb. Refer to
FIGURE 46
1
2
68
Figure
46.
Routing upper-left quadrant cables to the left
1
3
4
Upper left quadrant
Side combs (18)
2
3
Cables from slot #1
4
Cables from slot #2
BigIron RX Installation Guide
53-1001811-01
Advertisement
Table of Contents
