Table of Contents
Advertisement
Product Overview
In this chapter
Product overview
The BigIron RX Series switch provides high-performance L2/3 switching for the Enterprise, large
data centers, and grid computing topologies.
The BigIron RX Series switch provides the following benefits:
•
•
•
•
•
•
•
•
•
•
BigIron RX Installation Guide
53-1001811-01
•
Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
•
Hardware features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
•
Supported software features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
240 Gbps full-duplex capacity per full slot and over 1.92 Terabit switching capacity for
wire-speed, non-blocking switching and routing of up to 1.14 Bpps throughput capacity.
Non-blocking 10 GbE and 1 GbE port density of up to 64 non-blocking 10 Gigabit Ethernet or
384 Gigabit Ethernet ports within a 16-slot chassis and up to 192 10 Gigabit Ethernet or 1,152
Gigabit Ethernet ports in a standard 7-foot Telco rack.
Ultra-low latency routing of up to 512,000 IPv4 routes in hardware.
Support for a comprehensive set of standards-based routing protocols including RIP, IS-IS,
BGP4, and OSFP.
Foundry Direct Routing (FDR) with rule-based ACLs provide wire-speed forwarding, filtering and
accelerated convergence.
End-to-end QoS delivery with Advanced Bandwidth Management (ABM) features.
The High availability (redundancy) of the following BigIron RX Series critical components are:
•
Redundant management modules with Hitless Management Failover (HMF)
•
Redundant switch fabric elements
•
Redundant fans
•
Interface modules with hot-pleadable optics
•
Hot-swappable power supplies
80 Gbps of cross-module link aggregation based on 802.3ad for reliant bandwidth scalability
between any two BigIron RX Series 10 Gigabit Ethernet switches.
Built-in sFlow™ technology (RFC 3176) delivers scalable network monitoring, accounting and
billing at 10 Gbps speed using Layer 2-7 per-port information, offering detailed capacity
planning and security analysis solutions.
A management (10/100/1000BaseTX Ethernet) port that can provide connectivity to your
existing management network.
Chapter
1
1
Advertisement
Table of Contents
