Table of Contents
Advertisement
7
Displaying flash memory and version information
TABLE 25
This field...
Boot-Monitor Image
Startup Configuration
Boot Flash
Boot-Monitor Image
Interface Modules
Line Card Slot <number>
Code Flash
IronWare Image (Primary or
Secondary)
170
Code flash and boot flash information (Continued)
Displays...
Indicates the monitor image installed in the management module's code
flash. The image name format is described in
conventions"
about the image:
•
Version – "2.3.0Txxy" indicates the image version number. The "Txxy"
is used by Brocade for record keeping. The "xx" indicates the hardware
type, while the "y" indicates the image type.
•
Size – The size, in bytes, of the image.
•
Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
•
Compilation date and time – The date and time that Brocade compiled
the image.
The output displays the following information about the startup
configuration, which is saved in the management module's code flash:
•
Size – Size, in bytes, of the startup configuration.
•
Check sum – A unique ID for the file. If the contents of the file change,
the check sum changes also.
•
Modification date and time – Date and time that the startup
configuration was last saved.
The model number and size of the management module's boot flash.
Indicates the boot image installed in the management module's boot flash.
The image name format is described in
conventions"
about the image:
•
Version – "2.3.0Txxy" indicates the image version number. The "Txxy"
is used by Brocade for record keeping. The "xx" indicates the hardware
type, while the "y" indicates the image type.
•
Size – The size, in bytes, of the image.
•
Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
•
Compilation date and time – The date and time that Brocade compiled
the image.
The interface module for which flash information is displayed.
The <number> parameter indicates the number of the chassis slot, 1 – 16,
in which the interface module is installed.
The model number and size of the interface module's code flash.
Indicates the IronWare image installed in the primary or secondary location
in the interface module's code flash. The image name format is described
in
"Software image naming conventions"
the following information about the image:
•
Version – "2.3.0Txxy" indicates the image version number. The "Txxy"
is used by Brocade for record keeping. The "xx" indicates the hardware
type, while the "y" indicates the image type.
•
Size – The size, in bytes, of the image.
•
Check sum – A unique ID for the image. If the contents of the image
change, the check sum changes also.
•
Compilation date and time – The date and time that Brocade compiled
the image.
on page 165. The output displays the following information
"Software image naming
on page 165. The output displays the following information
on page 165. The output displays
"Software image naming
BigIron RX Installation Guide
53-1001811-01
Advertisement
Table of Contents
