Table of Contents
Advertisement
3 Select the Transition type Alert from the list.
4 Specify the destination Step.
5 Click Set to provide the Alert details. Alert details window displays.
6 Specify the Alert Time value, in minutes, hours, or days. Click OK.
7 Provide a description for your transition and click OK.
5.6.6 Error Transition
An Error transition leads to a path that is taken if an automated step cannot successfully complete.
Error transitions can be used for Command, Mail, and Activity Steps (for example, if a Command
Step fails to execute).
Error Transitions should typically lead to some kind of notification. For example, an Error
Transition might lead to a Manual Step in which the user is instructed to manually run a process that
previously failed.
NOTE: The Error transition is only taken if the iTRAC call to the Command, Mail, or Activity Step
fails. If there is an internal error with the Command script or the mail server fails, this does not
satisfy the conditions for an Error transition.
Only the destination Step can be specified, along with a description.
To add an Error Transition:
1 Open the Process Builder.
2 Select an existing Decision step, right-click and select Add Transition.
3 Select the Transition type Error from the list.
4 Specify the destination Step.
5 Provide a description for this step and click OK.
5.6.7 Managing Transitions
After creating a transition, you can edit or delete the transition.
Modifying Transitions
To edit a Transition:
1 Click the iTRAC tab.
2 In the Navigator, click iTRAC Administration > Template Manager.
3 Highlight an existing template, click View/Edit. iTRAC Process Builder window displays.
4 Double-click an existing transition line. The Transitions window displays.
5 Edit the transition as needed.
6 If you are editing an expression from a decision step, click ... button and double-click the
expression.
132 Sentinel 6.1 User Guide
Advertisement
Table of Contents
