The following informational tabs, populated and edited using the Solution Designer, are available in
Documentation frame:
Description: This tab displays the description of selected node. An additional panel is
attached to this tab called Attachment. You can view attachments and their description in the
Description tab.
The user can add text to the External ID field to refer to specific regulations or corporate IDs.
Implementation: This tab, associated with the control nodes, displays the instructions for
implementing the selected control.
Testing: This tab, associated with the control nodes, displays the instructions for testing the
selected control.
Notes: The Notes tab, associated with the control nodes, is editable. This can be used for any
notes related to the control, including user comments on the testing or implementation process.
Figure 15-3
15.3 Managing Solution Packs
This section states to manage solution packs.
15.3.1 Importing Solution Packs
Solution Packs are be available from several sources. They can be downloaded from
support.novell.com/products/sentinel6 (http://support.novell.com/products/sentinel6)
license might be needed). They can be provided by one of Novell's partners, or they can be created
from content in your own Sentinel system.
The first step in using a Solution Pack is to import the .zip file into the system using the Import
Plugin Wizard. When a Solution Pack is imported, the .zip file is copied to the server where the
DAS (Data Access Service) components are installed. The actual contents of the Solution Pack are
not available in the target Sentinel system until the Controls are installed using the Solution
Manager.
If you import an updated version of a Solution Pack, you are prompted to replace the existing plugin.
336 Sentinel 6.1 User Guide
Documentation Frame
http://
(an additional