Configuring Sentinel Link; Configuring Sentinel Systems For Receiving Events; Accessing Event Source Management - Novell SENTINEL 6.1 SP2 - 02-2010 User Manual

Table of Contents

Advertisement

17.4 Configuring Sentinel Link

In a Sentinel Link Solution setup, the Sentinel system that forwards the events is called the sender
and the Sentinel system that receives the events is called the receiver. You can simultaneously link
multiple Sentinel systems to a single receiver system.
To configure a Sentinel link, you need to configure at least two systems: the sender machine and the
receiver machine. For further details on configuring Sentinel Link, read the following:
"Configuring Sentinel Systems for Receiving Events" on page 394
"Configuring Sentinel Systems for Sending Events" on page 411
17.5 Configuring Sentinel Systems for Receiving
Events
On the receiver system, you must configure the Sentinel
from the data received by the Sentinel Link Connector. You must also configure the Sentinel Link
Connector and configure a Sentinel Link Event Source Server to receive the event data from the
sender systems.

17.5.1 Accessing Event Source Management

"Sentinel" on page 394
"Sentinel Rapid Deployment" on page 394
"Sentinel Log Manager" on page 395
Sentinel
1 As the Sentinel Administrator User (esecadm), change the directory to:
$ESEC_HOME/bin
2 Run the following command:
control_center.sh
3 Specify the administrator username and password, then click OK.
4 In the Sentinel Control Center, select Event Source Management > Live View.
Sentinel Rapid Deployment
1 Open a Web browser to the following URL:
https://svrname.example.com: port/sentinel
Replace svrname.example.com with the actual DNS name or IP address (such as 192.168.1.1)
of the server where Novell Rapid Deployment is running.
2 If you are prompted to verify the certificates, review the certificate information, then click Yes
if it is valid.
3 Specify the username and password for the Sentinel Rapid Deployment account you want to
access.
4 Use the Languages drop-down list to specify which language you want to use.
5 Click Sign in.
394 Sentinel 6.1 User Guide
Link Collector, which generates events
TM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sentinel 6.1 sp2

Table of Contents