Table of Contents
Advertisement
15.4.7 Editing a Solution Pack
A saved Solution Pack can be edited using Solution Designer. For information about deploying the
changes into an existing system, see
page
364.
When an existing Solution Pack is saved, the user has several options:
Save: Saves an updated version of the original Solution Pack. If the Solution Pack is re-
imported into a Sentinel system, it replaces the old version.
Save As: Saves a renamed version of the original Solution Pack. If the Solution Pack is re-
imported into a Sentinel system, it replaces the old version.
Save As New: Saves a Solution Pack with a new unique identifier. If the Solution Pack is
imported into a Sentinel system, it does not impact any previously imported Solution Packs.
To edit a Solution Pack:
1 In Windows, use the Sentinel Solution Designer shortcut on the desktop, or start Solution
Designer by executing one of the following commands:
solution_designer.bat (in %ESEC_HOME%\bin on Windows)
solution_designer.sh (in $ESEC_HOME/bin on Solaris/Linux)
The Sentinel Solution Designer login window displays.
2 Provide your login credentials. Check Work Offline checkbox if desired, then click Login. The
Solution Designer displays.
3 To edit a Solution Pack, click File > Open. Browse and select the existing Solution Pack zip
file. Click Open.
4 To update the Solution Pack with modified content from the source Sentinel system, drag and
drop the content from the Content Palette to the appropriate Control.
5 Add or delete Controls as necessary.
6 Click File > Save, Save As, or Save As New.
7 If you selected Save or Save As and some of the content is out of sync, you will be prompted to
synchronize.
Section 15.5, "Deploying an Edited Solution Pack," on
Solution Packs 363
Advertisement
Table of Contents
