Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 76

Event Code
300102016
300102017
300102018
300102019
300102020
300102021
300102022
300103001
76 Novell Access Manager 3.1 SP1 Event Codes
Message
A Web Service request was
received for a user, but the
Liberty User Profile object for
that user is unavailable.
A Web Service request was
received for a user, and
attempt to read the requested
attributes from the Liberty
User Profile object was made,
but an error occurred.
A Web Service request was
received for a user, While
reading user data from an
LDAP user object, a mismatch
occurred because the LDAP
attribute is multi-valued, but
the Liberty attribute is single-
valued.
The user used an X509
Certificate to authenticate and
we tried to put the cert into the
SecretStore as a Base64 DER
encoded cert, but we got an
encoding error from the
security layer when trying to
get the DER encoded cert.
Result is that there will not be
a X509 Certificate in Secret
Store for this user.
A SAMLAssertion was
requested for a given user.
While generating the
SAMLAssertion an error
occurred.
The web service request did
not return a response within
the protocol timeout limit.
Request abandoned.
Remedy
Type: WARN:NIDP:WSF:016
Cause: An internal error has occurred.
Action: Make sure the administrator user has rights to
read, write and create Liberty User Profile objects in the
configuration data store.
Type: WARN:NIDP:WSF:017
Cause: An internal error has occurred.
Action: Evaluate the reason and take the appropriate
actions.
Type: WARN:NIDP:WSF:018
Cause: A multi-valued LDAP attribute has been
mapped to a single-valued Liberty attribute.
Action: Change the attribute mapping.
Type: WARN:NIDP:WSF:019
Cause: The X509 certificate cannot be encoded.
Action: Review the type of X509 certificates that are
being used for authentication.
Type: WARN:NIDP:WSF:020
Cause: The SAMLAssertion cannot be created.
Action: Review the reason for the failure and take
appropriate actions.
Type: WARN:NIDP:WSF:021
Type: WARN:NIDP:WSF:022
Type: WARN:NIDP:WSC:001
Cause: The web service consumer waited for the web
service request to return a response, but it did not
during the allowed waiting period.
Action: This waiting period may be increased by click
Access Manager > Identity Servers > Edit > Liberty >
Web Service Consumer, and setting the Protocol
Timeout to a higher value.