Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 139

Event Code Description
201002003 Restore failed to access the
configuration store.
201002004 Restore failed to format the
current configuration store
data.
201002005 Restore failed to prepare the
configuration store for data
import.
201002006 Restore failed to prepare the
configuration store for data
import.
101002007 Restore failed to restore the
backup data.
101002008 Failed to restore certificate from
backup file.
Remedy
Cause: The ICE utility failed to access the eDirectory
configuration store.
Action: Make sure that ICE is in the proper location
(Linux: /opt/novell/eDirectory/bin
that the host IP address, port, administrator, password
are all correct.
Cause: Restore was not able to save a current copy of
the configuration store. A current copy of the config
store is saved before the import in case the import fails.
Action: Make sure that ldifReverse is in the proper
location (Same directory as backup command).
Cause: ICE failed. Unknown reason because it has
previously been invoked successfully in the restore
script.
Cause: ICE failed. Unknown reason because it has
previously been invoked successfully in the restore
script.
Cause: ICE failed. Unknown reason because it has
previously been invoked successfully in the restore
script.
Action: Check the configuration store for the following
container:
ou=accessManagerContainer,o=novell
If it is not there, locate the
should be in the directory where you ran the restore
command. Run ICE to recover the configuration store to
the state it was in before you attempted the restore.
Enter the following command:
/opt/novell/eDirectory/bin/ice -SLDIF -f
recover.ldif -C -n -DLDAP -
sxxx.xxx.xxx.xxx -p636 -k -dcn=admin,
o=novell -wadmin_password -F
Cause: The java program restores the certificate failed.
The java program is certtool.jar which provides
command line access to various eDirectory certificate
functions.
Action: See the log file ( ambkup.log
details. The log file contains a listing of relevant
parameters with each error message. Assuming the
back up from which you are trying to restore was
successful, failure to restore is probably an incorrectly
supplied parameter. Enter the following command:
JAVA -classpath vcdnbkup.jar:cert
tool.jar com.novell.nids.bkuputil. Util -
userid cn=admin,o=novell -pwd secret -
vcdnUser
). Make sure
recover.ldif file. It
) for more specific
Backup and Restore (010) 139