Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 117

Event Code Description
100706022 RMI exception
100706023 Server did not initialize within 60 seconds Cause: A server component initialization
100706024 Exception - JCC server initialization failed Cause: A server component initialization
100706025 Error binding to RMI [port]
100706026 Error registering remote object
100706027 Error sending alert
100706028 Error getting client details for import
Remedy
Cause: An error occurred during the shutdown
process.
Action: This is a non-fatal error.
message could not be completed as the novell-
jcc service is not finished initializing.
Action: To restart the novell-jcc service, enter
the following command:
/etc/init.d/novell-jcc restart
If the problem persists, submit the
0.log.0 file for resolution.
message could not be completed.
Action: To restart the novell-jcc service, enter
the following command:
/etc/init.d/novell-jcc restart
If the problem persists, submit the
0.log.0 file for resolution.
Cause: Another process is likely using the
novell-jcc service port (default 1197).
Action: Make sure there are no other
processes using this port, then restart the
service.
Cause: A problem occurred during the RMI
bind process.
Action: Make sure that all components are of
the same build of Access Manager. Then
restart novell-jcc service.
Cause: A problem occurred sending the import
command to the Administration Console.
Action: Allow the system to retry the
operation. If it persists, submit the
file for resolution.
0.log.0
Cause: An RMI communication error has
occurred between the server component and
the novell-jcc service.
Action: Make sure the server component is
functioning properly and try the operation
again. If the problem persists, submit the
0.log.0 file for resolution.
Server Communications (JCC) (007) 117
jcc-
jcc-
jcc-
jcc-