Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 39

Event Code Description
100904040 Error - Could not find encryption keystore
for {0}.
100904041 Error - Could not find connector keystore
for {0}.
100904042 Error - Could not find trust keystore for {0}. Cause: An error occurred during the import
100904043 Error - Could not find OCSP trust keystore
for {0}.
100904044 Error - No keys were assigned to keystore:
{0}.
100904045 Error - Exception thrown in
processRequest of
UpgradeDeviceGroupHandler.
Remedy
Cause: An error occurred during the import
of the device.
Action: Consult the documentation and re-
import the device into the Administration
Console.
Cause: An error occurred during the import
of the device.
Action: Consult the documentation and re-
import the device into the Administration
Console.
of the device.
Action: Consult the documentation and re-
import the device into the Administration
Console.
Cause: An error occurred during the import
of the device.
Action: Consult the documentation and re-
import the device into the Administration
Console.
Cause: The keystore does not have any
certificates in it. This may or may not be a
bad condition. For instance, the OCSP trust
store can be empty and that should not
cause a problem. The signing, encryption,
connector, provider, and consumer keystores
should have one certificate in them. If it is
empty, either the device import failed or the
user manually removed the certificate from
the keystore.
Action: Check the keystore using the UI. If
the keystore shows that it has a certificate,
then the device import probably failed.
Consult the documentation and re-import the
device and also try deleting and re-creating
the NIDP configuration. Also, try replacing
the certificate in the keystore through the UI.
Cause: Error occurred while processing
request.
Action: Ensure the server component is
functioning correctly. Otherwise, submit the
app_sc.0.log file for resolution.
Administration Console (009) 39