Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 115

Event Code Description
100706004 Client list cannot be restored
100706005 Could not stop connector
100706006 No HTTP connectors were added
100706007 Exception - setting keystore properties on
http connector failed
100706008 Could not start HTTP server. Retry
Number: [n]
100706009 Exception during jcc shutdown
100706010 Exception in testing HTTP server
100706011 MalformedURLException - HTTP server
100706012 Failed to load eDirectory keystore
provider
Remedy
Cause: An IO error occurred while reading the
list of registered server components.
Action: Make sure the file has read access. If
an upgrade has been performed, make sure all
components on the system have also been
upgraded. If the problem persists, submit the
jcc-0.log.0 file for resolution.
Cause: The embedded HTTP server could not
be stopped.
Action: Allow the system to retry the
operation. If it persists, submit the
file for resolution.
0.log.0
Cause: An internal software problem occurred.
Action: Submit the jcc-0.log.0
resolution.
Cause: The keystore_info.xml
not be read, or was corrupted.
Action: Submit the
jcc-0.log.0
resolution. Reinstall if necessary.
Cause: Some other application may be using
the port we require to be open.
Action: Allow the system to retry the
operation. If it persists, submit the
0.log.0 file for resolution.
Cause: A problem shutting down the
embedded HTTP server occurred.
Action: This is a non-fatal error. If the problem
persists, submit the
jcc-0.log.0
resolution.
Cause: An error testing the HTTP server
occurred.
Action: This is a non-fatal error.
Cause: An error testing the HTTP server
occurred.
Action: This is a non-fatal error.
Cause: Service could not register handler into
keystore Java environment handler set.
Action: This is a non-fatal error. If the problem
persists, submit the jcc-0.log.0
resolution.
Server Communications (JCC) (007) 115
jcc-
file for
file could
file for
jcc-
file for
file for