Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 15

Event Code Description
100901027 Error in
CertHandler.getNIDPDeviceKeystoreNam
e (The name of the device's keystore was
not found).
100901028 Error in CertHandler.isTomcatCert (Unable
to determine if the specified certificate is
the one being used by Tomcat).
100901030 Error in
CertHandler.getNodeKeystoreNames
(The cluster object was not found in the
configuration store, or the cluster server
list was empty).
100901031 Error in
CertHandler.getClusterDisplayName (The
cluster object was not found in the
configuration store).
100901032 The device does not exist but the
certificate is in a keystore assigned to that
device.
100901033 The device does not exist but the keystore
is assigned to that device.
100901034 Unable to retrieve the primary member of
the group.
100901035 Unable to remove the node keystore
setting off the Access Gateway group
device.
700901036 Unable to set the Update Servers status.
Remedy
Cause: The cluster keystore representation
object was not found.
Cause: The cluster keystore representation
did not have a device type specified.
Action: Delete and recreate the Identity
Server Configuration or Access Gateway
Group that is causing the problem and then
re-add the members.
Cause: The certificate representation has
missing or invalid attributes.
Action: Delete this certificate and re-import
it.
Cause: The cluster object was not found in
the configuration store, the type of the cluster
could not be determined, or the cluster
server list was empty.
Action: No action needed unless your
devices are unable to communicate. If you
are having problems with communication,
delete and recreate the Identity Server
configuration or Access Gateway cluster that
is causing the problem.
Action: Delete and recreate the Identity
Server configuration or Access Gateway
cluster that is causing the problem and then
re-add the members.
Cause: It's possible the device is in a
partially-imported state.
Action: Delete the keystore, if possible, and
re-import the device.
Cause: It's possible the device is in a
partially-imported state.
Action: Delete the keystore, if possible, and
re-import the device.
Cause: The group is corrupt.
Action: Delete the group, re-create it, and
re-add the members.
Cause: Could not locate the keystore object
in the configuration store.
Action: No action required.
Cause: Communication error.
Action: Manually restart or update the
device.
Administration Console (009) 15