Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 68

Event Code
300101011
300101012
300101013
300101014
300101015
68 Novell Access Manager 3.1 SP1 Event Codes
Message
Assertion is being replayed.
Assertion does not contain an
authentication statement.
Unable to validate the subject
of the assertion.
Assertion not yet valid.
Assertion no longer valid.
Remedy
Type: WARN:NIDP:USERMSG:011
Cause: An assertion has been received that was
already used to authenticate a user at the service
provider.
Action: This is a security mechanism that if persists
may require some investigation to determine who is
trying to replay the assertion. Assertions are only good
for single use.
Type: WARN:NIDP:USERMSG:012
Cause: An identity provider has sent an assertion that
is not complete.
Action: Check with administrator of trusted provider to
determine why statement is not being sent.
Type: WARN:NIDP:USERMSG:013
Cause: A subject may not have been sent in the
assertion or was not valid. This check protects from
certain assertion attacks.
Action: If persistent, check the protocol message sent
for a missing subject and then notify administrator of
trusted site.
For more information, see
SAML 2.0 Partner Gives 300101013 Error" (http://
www.novell.com/support/php/
search.do?cmd=displayKC&docType=kc&externalId=3
903427&sliceId=2&docTypeID=DT_TID_1_1&dialogID
=69860557&stateId=0%200%2069862016).
Type: WARN:NIDP:USERMSG:014
Cause: An assertion was received that is not valid until
sometime in the future.
Action: Check server's clock for accuracy. Attempt to
validate the clock accuracy of the computer generating
the assertion.
Type: WARN:NIDP:USERMSG:015
Cause: An assertion was received that had a time
validity period that is in the past.
Action: Check server's clock for accuracy. Attempt to
validate the clock accuracy of the computer generating
the assertion. Try to authenticate again.
"Federation with External