Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 107

Event Code Description
100702018 Error sending periodic health
100702019 Crypto key not found
100702020 Error calling initializationComplete/
serviceStopComplete
100702021 Server is not connected
100702022 Error binding to RMI port
100702023 Error registering with server
100702024 Cannot contact server; retrying
Remedy
Cause: The system cannot communicate with
the administration console, or some other
communication error occurred.
Action: Make sure the system can
communicate with the administration console
and that it is functioning properly.
Cause: The jcc.keystore file was not found.
Action: Make sure the installation completed
successfully, and that the novell-jcc service is
running. Otherwise, submit the
file for resolution.
Cause: An RMI error occurred communicating
with the novell-jcc service.
Action: Make sure the installation completed
successfully, and that the novell-jcc service is
running. Otherwise, submit the
file for resolution.
Cause: The novell-jcc service is not running.
Action: Make sure the installation completed
successfully, and that the novell-jcc service is
running. Otherwise, submit the
file for resolution.
Cause: The novell-jcc service is not running, or
the RMI ports are already bound by some other
process.
Action: Make sure the installation completed
successfully, and that the novell-jcc service is
running. Otherwise, submit the
file for resolution.
Cause: The component could not register with
the novell-jcc service. Likely and RMI
communication error.
Action: Restart the novell-jcc service. If the
problem persists, submit the
for resolution.
Cause: The novell-jcc service was stopped,
likely temporarily.
Action: Make sure that the novell-jcc service is
running. Otherwise, restart it. If the problem
persists, submit the jcc-0.log.0
resolution.
Server Communications (JCC) (007) 107
jcc-0.log.0
jcc-0.log.0
jcc-0.log.0
jcc-0.log.0
file
jcc-0.log.0
file for