Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 105

Event Code Description
Package com.novell.jcc.client
100702001 Exception sending alert
100702002 Could not create default response XML
100702003 Exception while building alert request:
[exception], retrying
100702004 Configuration for Device Manager not set Cause: The settings file determining where to
100702005 Error getting configuration for Device
Manager
100702006 Alert could not be sent
100702007 Bad health URL
100702008 Error sending alert
Remedy
Cause: Alert could not be sent to the Admin
Console.
Action: Make sure the server can
communicate with the administration console.
Otherwise, submit the jcc-0.log.0
resolution.
Cause: A problem occurred creating the
default XML document.
Action: Submit the
jcc-0.log.0
resolution.
Cause: The alert information was not saved in
XML correctly.
Action: Submit the jcc-0.log.0
resolution.
send the alert was not found.
Action: Restart the novell-jcc service.
Otherwise, submit the
jcc-0.log.0
resolution.
Cause: There was a problem reading the
settings file.
Action: Restart the novell-jcc service.
Otherwise, submit the jcc-0.log.0
resolution.
Cause: The response from the administration
console was not successful.
Action: The system will try indefinitely to
resend the alert. Make sure the administration
console is functioning. Otherwise, submit the
file for resolution.
jcc-0.log.0
Cause: The IP address or port setting for the
administration console has been corrupted.
Action: Make sure the settings.properties file
contains correct information. Restart the novell-
jcc service.
Cause: The system cannot communicate with
the administration console.
Action: Make sure the system can
communicate with the administration console
and that it is functioning properly.
Server Communications (JCC) (007) 105
file for
file for
file for
file for
file for