Novell ACCESS MANAGER 3.1 SP1 - EVENT CODES Manual page 110

Event Code
100704004
100704005
100704006
100704007
100704008
100704009
100704010
100704011
100704012
100704013
110 Novell Access Manager 3.1 SP1 Event Codes
Description
Error sending [name] command
Could not send alert
Exception - update password failed
ecc.cfg does not exist!
Error loading ecc.cfg
Stopped waiting for JCC server
Cannot write ecc.cfg
Error reading configuration
Cannot write ecc.cfg
Exception - check esp status failed
Remedy
Cause: Could not send the command to the
Access Gateway.
Action: If the problem persists, restart the
server. Otherwise submit the
file for resolution.
Cause: A problem occurred while sending
alert.
Action: This is a non-fatal error. If the problem
persists, submit the
jcc-0.log.0
resolution.
Cause: Could not read the config user
password.
Action: Restart the server. Otherwise, submit
the jcc-0.log.0 file for resolution.
Cause: A problem during the installation
process occurred.
Action: Submit the
jcc-0.log.0
resolution, then reinstall the server.
Cause: Could not read the
Action: Allow the operation to retry, otherwise,
submit the jcc-0.log.0
Cause: The server didn't initialize in a timely
manner.
Action: Restart the novell-jcc service.
Cause: Could not write the specified config file.
Action: Allow the operation to retry. If it
persists, restart the server.
Cause: Could not parse Access Gateway
configuration data.
Action: Allow the operation to retry. If it
persists, submit the
jcc-0.log.0
resolution and restart the server.
Cause: Could not write specified file.
Action: Allow the operation to retry. If it
persists, submit the jcc-0.log.0
resolution and restart the server.
Cause: An RMI error occurred while
communicating to the ESP component.
Action: Allow the operation to retry. If it
persists, submit the
jcc-0.log.0
resolution and restart the server.
jcc-0.log.0
file for
file for
file.
ecc.cfg
file for resolution.
file for
file for
file for